Exacq exacqVision Edge/Illustra Quick Start Guide - Manual

exacqVision Edge/Illustra Quick Start Guide
www.e x acq.com Page 1 of 5
2/25/2015
Introduction
exacqVision Edge is a variation of the standard exacqVision Server application that operates on a compatible Illustra
camera. It can record video from the local camera directly to the SD memory card in the camera and archive it to a remote
drive(s). The exacqVision Client application can connect to any combination of Edge and standard servers
simultaneously.
Requirements

A one-channel license from Exacq Technologies must be obtained for each Edge-enabled camera. (A standard
Edge license part number is EDGE, and an Edge Plus license part number is EDGEP.)

exacqVision Edge is compatible with Illustra cameras:

The i825 fisheye camera must be running version 1.0.3 firmware or later.

The I llustra Pro Compact Mini-Dome & Mini-Bullet cameras must be running version
ADCi6x0M_V2.0.10.1050 firmware or later.

An SDHC class 10 or better SD memory card no larger than 64GB, purchased separately, is required for each
camera.
NOTE: Up to 2GB is reserved for exacqVision Edge operations and cannot be used for exacqVision Edge
data storage.

A separate web server computer running the exacqVision Web Service application is required for mobile or web
clients connecting to Edge servers.
8200-1132-02 A0