Fire Magic 3275-12 Spark Ignitor Sideburner User Manual

Spark ignitor replacement for sideburners

Advertising
background image

Spark Generator

w/lock Stem

Part # 3199-23-1

Ground Wire

Part # 3199-13-1

Electrode Wire

Part # 3275-14

Spark Generator

Screws,8-32 x 5/8 (2)

Part # 3985-2105F

Knob,lock-On

Part # 3199-23-02

Manifold

Mounting Bracket

Electrode

Fire Magic Sideburner Ignition Systems are
generally quite reliable. In the event that
replacement of par ts is necessar y, these
illustrations and instructions will simplify installation.

Underside View

(Figure 1)

Top View

(Figure 2)

Robert H. Peterson Co. • 14724 East Proctor Avenue • City of Industry, CA 91746

1. Unplug the wire or wires and remove

the old spark generator and any
brackets or spacers used for mounting.
Also, unplug the old electrode wire from
the electrode (Figure 1).

2. Mount the new spark generator, using

the two (2) 8-32 x 5/8” screws provided.
No brackets or spacers are required.
Using a Phillips screwdriver, tighten the
screws until the generator is firmly
secured below the housing panel
(Figure 2).

3. Plug the new electrode wire into the electrode

and attach the ground wire under one of the
nuts securing the manifold bracket. Loop
each wire around the gas connector tubing
and plug into the spark generator (Figure 1).

4. Press the ignitor knob onto the ignitor stem

until it snaps into place. The knob will be
“locked” on to the stem but can be removed by
firmly lifting the knob off the stem or by placing
the blade of a screwdriver under the knob and
gently lifting. This knob can be accidentally
turned the wrong way (counterclockwise) without
damaging the ignitor knob or the spark
generator.

REV A 030105

No. L-C2-02605

Ignitor Assembly Complete
Part # 3275-12
(Includes all components listed below with
part numbers)

We reserve the right to amend product

specifications without prior notice.

This manual may not be copied, photocopied,

reproduced, translated, or published in any electronic or

machine-readable form in whole or in part without prior

written approval of Robert H. Peterson Co.

SPARK IGNITOR REPLACEMENT FOR SIDEBURNERS

Advertising