Dell PowerEdge 4220 - Manual (Page 13)

Installation Guide
11
Figure 1-3. Removing the Back Doors
WARNING:
Due to the size and weight of the door, it is recommended that you lay
the removed door flat with its outer surface facing upward.
d Lay the door in a safe location with the door’s outer surface facing
upward.
Laying the door flat with the outer surface facing upward helps
prevent damage to its cosmetic coating.
e Repeat steps a through d for the left back door.
Replacing the Back Doors
To replace the back doors, perform the steps for removal in reverse.
1 hinge pin 2 hinge body
3 hinge-pin housing
1
2
3