Flowserve Dual Gas Barrier Seals User Manual
Page 14
14
12. Repairs
This product is a precision sealing device. The design and dimension tolerances are
critical to seal performance. Only parts supplied by Flowserve should be used to
repair a seal. To order replacement parts, refer to the part code and B/M number. A
spare backup seal should be stocked to reduce repair time.
!
When seals are returned to Flowserve for repair, decontaminate the seal
assembly and include an order marked "Repair or Replace." A signed cer-
tificate of decontamination must be attached. A Material Safety Data Sheet
(MSDS) must be enclosed for any product that came in contact with the seal.
The seal assembly will be inspected and, if repairable, it will be rebuilt, tested,
and returned.
All Flowserve Corporation, Flow Solutions, products must be installed in accordance
with Flowserve installation instructions. Failing to do so or attempting to change or
modify Flowserve products will void Flowserve’s limited warranty. Flowserve’s limited
warranty is described fully in Flowserve’s Standard Terms and Conditions of Sale.
Flowserve makes no warranty of merchantability or fitness for a particular purpose
and in no event shall Flowserve be liable for consequential or incidental damages.