Flowserve PMV D20 - Manual (Page 7)

7
4. Specifications
Input signal 4-20 mA
Current supply min. 3,6 mA
Current supply Max. 150 mA
Load Standard 400 ohm at 20mA
Load HART 470 ohm at 20mA
Voltage dropStandard 8 VDC at 20mA
Voltage dropHART 9.4 VDC at 20mA
Angle of rotation min 0-40°
Angle of rotation Max 0-90°
Air supply range 1.5 – 6 bar
Out put 0-100% of air supply pressure
Air supply quality Free from oil, dust and moisture IEC 770,
ISA 7.0.01
Air supply effect <0.1%FS for10% pressure change at 6 Bar
Ingress protection IP66 / Nema 4X
Operating humidity 0-100% rh non-condensing
Air connections 1/4” NPT
Cable entry 2 x 1/2” or 2 x M20x 1,5
Terminals Screw terminals 2,5 mm 2 (AWG 14)
Operating Temperature -20 to +85°C-40 to +85°C (optional)
Storage temperature -40 to +85°C
Air delivery capacity 7 Nm 3 /h @ 6 bar (3 bar diff pressure)
Air delivery capacity Double acting 7 Nm 3 /h @ 6 bar (3 bar diff pressure)
Air consumption Single acting 0,120 Nm 3 /h @ 6 bar
Air consumption Double acting 0,120 Nm 3 /h @ 6 bar
Cv air delivery Single acting 0,12
Cv air delivery Double acting 0,12
Cut off function Close 0.5% Open 99.5%
Linearity <1%
Sensitivity <0.05%
Resolution <0,1%
Repeatability <0.2%
Hysteresis + dead band <0.5%
Temp effect <0.1%/10K
Mounting position effect <0,2%
CE 93/68/EEC, 2004/108/EEC, 2006/95/EEC
Approvals Ex II G Ex ia IIC T4 Ta: 85°C
Certificate nr Nemko 08ATEX1362X
Housing material Die cast Aluminium
Surface treatment Powder coating
Soft goods Nitrile
Weight 1,5 kg
4.1 Technical data