Flowserve Logix MD+ ValveSight User Manual
Page 122
Advertising
ValveSight™ Diagnostics DTM Manual for Logix MD+ Positioner with HART®
FCD-
LGENSF0014-00
© Flowserve Corporation
122
Action Buttons
The Apply button will save changes to the connected device.
The Retrieve button will retrieve the latest information from the device.
Warnings and Alarms
Command Amplitude
•
Definition: The amplitude of the command signal is above the warning
or alarm limit. This could mean the control loop has larger swings than
desirable.
•
Possible Solutions: Verify the limits are set at an appropriate level.
Review the control loop parameters and equipment. Adjust as
necessary.
Advertising
This manual is related to the following products: