Flowserve ORGS 11-2 User Manual
Page 7
7
Important Notes
Safety Note
Danger
When loosening the electrode hot cooling water might escape. This
presents the danger of severe scalding. It is therefore essential not to
dismantle the measuring electrode ORGS 11-1 unless the boiler pressure
is verified to be zero.
The terminal strip of the measuring electrode ORGS 11-1 is live during
operation.
This presents the danger of electric shock. Cut off power supply before
mounting/removing the housing cover.
The equipment must only be installed by qualified staff.
Qualified staff are those persons who – through adequate training in electrical
engineering, the use and application of safety equipment in accordance with
regulations concerning electrical safety systems, and first aid & accident prevention –
have achieved a recognised level of competence appropriate to the installation and
commissioning of this device.
Usage for the intended purpose
Use oil detector & alarm ORGS 11-2 only for signalling ingress of oil in cooling
water circuits.