Flowserve APEX 5100 Current-to-Pressure Transducers - Manual (Page 3)

PS0003-CV (CVAUTO-200) 05/03 Page: 3 of 4
© 2003, Flowserve Corporation, Printed in USA
Automax Valve Automation Systems
Product Specification
Flowserve Corporation 1350 N. Mountain Springs Parkway 1978 Foreman Dr.
Flow Control Division Springville, Utah 84663-3004 Cookeville, TN 38501
www.flowserve.com Phone: 801 489 8611 Phone: 931 432 4021
Part Materials
Housing/Cover
Anodized Aluminum
w/Dichromate/Powdercoat
Regulator Plated Steel
Regulator and Filter Covers Stainless Steel
Coil/Nozzle Assembly Plated Steel
Coil Retainer Anodized Aluminum
All Fasteners Stainless Steel
All O-ring Seals and Gaskets Nitrile Rubber
Parameter Units Value
Resolution % Full Scale 0.5
Deadband % Full Scale 0.5
Repeatability % Full Scale 0.5
Hysteresis % Full Scale 0.5
Linearity % Full Scale 1
Gain - Low Flow %/% 15-50
High Flow %/% 30-110
Max Flow %/% 50-150
Supply Pressure Effect %/1 PSIG 0.05
Supply Pressure Range PSIG 30-120
Air Consumption SCFM 0.3
Ambient Temp. Range Degrees F -40 to 180
Temperature Effect %/1 Deg. F 0.5
Input Signal mA 4-20
Signal Voltage VDC 6-30
Materials of Construction: Performance Specs:
Apex 5000 w/ 5100 I/P Module
1.120
0.156
0.50
0.155 FLATS
ALIGNMENT SCREW
Dimensions: Apex 5000 w/ 5100 I/P Module
Optional NAMUR Shaft