Flowserve APEX W7000 Pneumatic Positioner - Manual (Page 6)

6
Electrical Specifications
Model Agency Approvals Hazardous Location
Rating
1
Max Voltage
(vdc)
Min. Voltage
(vdc)
Max. Current
(mA)
W7000 None None N/A N/A N/A
W7100 None None 30 vdc 6 vdc 150 mA
W7200
FM
CSA
ATEX/IECEx
(EX) Cl. I Div 1, Gr. B-D
(EX) Cl. I Div. 1 Gr. B-D
(EX) Ex d IIC T4-T6
3
30 vdc
30 vdc
30 vdc
4
6 vdc
6 vdc
6 vdc 150 mA
150 mA
50 mA
4
W7400
2
FM
CSA
ATEX/IECEx
(IS) Cl. I Div. 1 Gr. A-D
(IS) Cl. I Div. 1 Gr. A-D
(IS) Ex ia IIC T6 3
28 vdc
4
28 vdc
4
30 vdc 4
6 vdc
6 vdc
6 vdc 50 mA
4
50 mA
4
110 mA 4
W7500 None None 30 vdc 6 vdc 30 mA
W7600 None None N/A N/A N/A
Warning: These instruments must be installed in accordance with local national electrical codes, especially for hazardous
locations. Consult unit label to determine specific unit certifications.
Notes:
1 See hazardous location certificate for detailed temperature ratings. All Apex W7000 units comply with ATEX
directive for non-electric equipment intended for use in hazardous locations to Ex II 2 G.
2 Additional information regarding entity parameters and instructions for wiring to intrinsically-safe I-P may be found
in separate IOM, as well as in the hazardous location certificate.
3 See hazardous location certificate for special conditions for safe use.
4 Maximum voltage and current considerations may be affected by application specifics, such as choice of barrier,
ambient temperatures, etc. See hazardous location certificate for additional information.