Flowserve APEX 8000 High-Performance Positioner User Manual
Page 16
Flowserve Corporation
1978 Foreman Drive
Cookeville, TN 38501
USA
Phone: +1 931 432 4021
Flowserve Flow Control UK Ltd
Haywards Heath, West Sussex
UK
Phone: +1 44 (0)1444 314400
Flowserve Corporation
12 Tuas Avenue 20
Singapore
Phone: 68798900
Flowserve Corporation
Rua Tocantins, 128
Sao Caetano do Sul, SP
Brazil
Phone: +55 11 2169 6300
To find your local Flowserve representative please use the
Sales Support Locator System found at www.flowserve.
com.
Or call toll free: +1 931 432 4021
Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly
selected, this Flowserve product is designed to perform its intended function safely during its useful life. However,
the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous
applications under a wide variety of industrial service conditions. Although Flowserve can (and often does) provide
general guidelines, it cannot provide specific data and warnings for all possible applications. The purchaser/user must
therefore assume the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance
of Flowserve products. The purchaser/user should read and understand the Installation Operation Maintenance (IOM)
instructions included with the product, and train its employees and contractors in the safe use of Flowserve products in
connection with the specific application.
While the information and specifications contained in this literature are believed to be accurate, they are supplied for
informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance
thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any
matter with respect to this product. Because Flowserve is continually improving and upgrading its product design, the
specifications, dimensions and information contained herein are subject to change without notice. Should any question
arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of its worldwide
operations or offices.
© 2009 Flowserve Corporation, Irving, Texas, USA. Flowserve is a registered trademark of Flowserve Corporation.
FCD AXENIM0130-06