Disassembly and reassembly – Flowserve B320 Series Limitorque User Manual
Page 15
15
Limitorque B320 Series FCD LMENIM3201-02 – 01/15
flowserve.com
6
Disassembly and Reassembly
No special tools are required for assembly/disassembly of the B320 series bevel gear operators.
c
WARNING: Valve must be in fully opened position with no pressure in the line to perform work
on the gear operator.
a
CAUTION: During disassembly and reassembly, all removed components should be cleaned and
placed in an area free of dirt, water, or other foreign material.
a
CAUTION: Care should be taken in removing the ball bearings located between the bevel gear and
thrust housing. These bearings are non-caged, hardened ground balls.
The table below indicates the number of ball bearings utilized by each B320 size.
Table 6.1 – Quantity of Ball Bearings
Operator
Quantity
B320-10
42
B320-20
42
B320-30
57
B320-40
57
B320-50
53
B320-70
74
B320-80
80
B320-90
66