Flowserve Lockout Module - Manual (Page 2)

lock to end of the pin extending from the other side of
the Lockout housing.
Maintenance Instructions
No periodic maintenance is necessary for the Lockout
Module. All parts are designed for the full rated load of
the ISO valve pattern capable of being mounted to a
given Lockout Module. All materials of construction
are corrosion resistant, including an aluminum powder
coated epoxy housing.
Options
Single position
Lockout housing is supplied with only one set of
operable lockout slots. Housing may be
oriented to provide either lockout open or lockout
close.
Stainless steel housing / pins
Studs, bolts, and washers are stainless steel.
Stainless Housing/Pin
The lockout device shall be an Automax Lockout
Module, capable of being sandwich mounted between
an actuator and a standard mounting kit. It shall be
capable of adjustment in one position, and rated for the
full load torque of the valve pattern specified. The
housing shall be electrostatic powder coated epoxy
aluminum, and the Lockout pin shall be tethered to the
Lockout housing and capable of being safely secured
on the unit, when not in use. All materials of
construction shall be corrosion resistant.
B00160-0 1 Page 2 0f 2
11444 Deerfield Road
Cincinnati, Ohio 45242
(513) 489-7800
FAX (513) 489-5243 Lockout Module
ISO Pattern
3
4 2
1
11444 Deerfield Road
Cincinnati, Ohio 45242
(513) 489-7800
Fax (513) 489-5243 Automax Controls, Inc.
120 Vinyl Court
Woodbridge, Ontario L4L-4A3
(905) 856-8568
Fax (905) 856-7905 Davco Equipment
1744 W. 4th St. Suite208
Freeport, TX 77541
(409) 239-3300
Fax (409) 239-2311
Lockout Module Single/Dual Position Size (ISO) Options
LOM Blank
S1
-Dual Position
-Single Position
F05
F07
F10
F12
F14
F16
SS
SP
-Stainless Steel Housing / Pin
-Stainless Steel Pin
Example: To order dual position Lockout Module stainless steel for ISO F10 pattern, order LOMF10SH
Note: When ordering Lockout mounting kits or Lockout couplers, specify actuator size and model, and
valve size.
Example: To retrofit existing SX125 mounted to a 3" Durco plug valve, LOMF10 with Lockout Coupler for
SX125 to 3" Durco G411.
Item Description Material Qty.
1 Lockout Module
housing
Aluminum epoxy
powdercoat
1
2 Lockout coupler Steel/epoxy
powdercoat
1
3 Lockout pin Steel/zinc plate 1
4 Lockout pin cable Steel/nylon coat 1
Bill of Materials
How To Order
How To Specify