Linksys WRT160NL - Manual (Page 36)

Appendix A
Troubleshooting
32 Wireless-N Broadband Router with Storage Link
system settings. Click the Computer Name tab. The
workgroup name is displayed.) If they differ, then
change the workgroup name of the Router. Follow these
instructions:
Access the web-based utility of the Router. (Refer to 1.
Chapter 3: Advanced Configuration, page 4.)
Click the
2. Storage tab.
Click the 3. Administration tab.
In the 4. Workgroup field, enter the workgroup name of
your computer.
Click
5. Save Settings.
In Windows XP, you do not see the Router in the My
Network Places screen.
In the Network Tasks section, click Show icons for
networked UPnP devices. If the Router does not appear,
follow these instructions:
Go to 1. Start > Control Panel > Firewall.
Click the 2. Exceptions tab.
Select 3. UPnP Framework.
Click 4. OK.
In Windows XP, you do not see your USB storage device
in the View workgroup computers screen.
Make sure the Router and your computer use the same
workgroup name. (The default workgroup name of
the Router is workgroup. In Windows XP, go to Start >
Control Panel > System. Click the Computer Name tab.
The workgroup name is displayed.) If they differ, then
change the workgroup name of the Router. Follow these
instructions:
Access the web-based utility of the Router. (Refer to 1.
Chapter 3: Advanced Configuration, page 4.)
Click the
2. Storage tab.
Click the 3. Administration tab.
In the 4. Workgroup field, enter the workgroup name of
your computer.
Click
5. Save Settings.
WEB: If your questions are not addressed
here, refer to the Linksys website,
www.linksysbycisco.com