Flowserve PRS 9 - Manual (Page 14)

14
Annex
Warning
The terminal strip of the PRS 9 is live during operation. This presents the
danger of electric shock. Cut off power supply before opening the
equipment and before inserting or removing the 19" slide-in unit.
Fault finding list
The LED is not illuminated after applying the mains voltage
Fault:
The mains voltage has not been switched on.
Remedy: Switch on the mains voltage. Check the 19" slide-in unit for correct installation.
No or incorrect functions
Fault:
The internal circuitry is defective.
Remedy: Replace the cycling timer.
F
We hereby declare that the equipment PRS 9 conforms to the following European
guidelines:
■ LV guideline 73/23/EWG version 93/68/EWG
■ EMC guideline 89/336/EWG version 93/68/EWG
which are based on the following harmonised standards:
■ LV standard EN 60947-5-1: 1991
■ EMC standard EN 50 081-2, EN 50 082-2
This declaration is no longer valid if modifications are made to the equipment without
consultation with us.
Declaration of conformity
Bremen, 28th April 1997
GESTRA GmbH
Dr. Anno Krautwald Dr. Christian Politt