Standard setting – Flowserve NRGS 16-2 User Manual
Page 13
Advertising
13
The measuring range can be switch selected between
≥
0.5
µ S/cm and
≥
10
µ S/cm
by means of DIP switch :
1.Unscrew screws at the electrode terminal, remove cover , Fig. 6
DIP switch 1– 4 OFF
Measuring range
≥
0.5
µ S/cm
DIP switch 1– 4 ON
Measuring range
≥
10
µ S/cm
2.Replace cover and fasten screws
Standard setting
Factory setting
The compact system is delivered with the following factory settings:
■
Measuring range
≥
10
µ S/cm
Switch selection of measuring range
Attention
■
Screwdriver for cross head (“Phillips”) screws, size 1
■
Screwdriver for slotted screws, size 2.5; completely insulated according to
VDE 0680
■
Do not damage the electronic components when operating DIP switch.
Tools
J
J
J
J
J
D
D
D
D
D
F
F
F
F
F
F
F
F
F
F
D
D
D
D
D
Advertising