Dell POWEREDGE R710 - Manual (Page 8)

Dell™ PowerEdge™ R710 Technical Guidebook
8
b. Dimensions and Weight
Height 8.64cm (3.40")
Width 44.31cm (17.44")
Depth 68.07cm (26.80")
Weight (maximum config) 26.1kg (57.54lbs)
.
c. front Panel view and features
Front I/O panel access including USB and VGA interfaces. The following components are located on
the front:
• Express service tag (Information tag). A slide-out panel for system identification labels
• Power on indicator, power button
• NMI indicator (Nonmaskable interrupt). A device sends an NMI to signal the processor about
hardware errors. It is used to troubleshoot software and device driver errors when using certain
operating systems
• (2) USB connectors. Connects USB devices to the system. The ports are USB 2.0 compliant
• Video connector
• LCD menu buttons. Allows you to navigate the control panel LCD menu
• LCD panel. Provides system ID, status information, and system error messages
• System identification button
• Optical drive (optional)
• Hard drives
• Flex bay
D. back Panel view and features
The following components are located on the rear panel of the R710 enclosure:
• (1) 15-pin VGA connector
• (1) 9-pin serial port connector
• (4) 10/100/1000 Ethernet RJ-45 connectors
• (1) Rear system ID button
• (1) Active ID Cable Management Arm external LED jack
• (2) USB ports
• (1) (Optional) iDRAC6 Enterprise RJ-45 connector
• (1) Optional) iDRAC6 Express SD module