Foxconn nT-A3550 - Manual (Page 20)

3
15
Boot
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Boot Security Save & Exit Boot
Boot Configuration
Bootup Numlock State [On]
Quiet Boot [Disabled]
Fast Boot [Disabled]
Set Boot Priority
1st Boot [USB CD/DVD]
2nd Boot [Hard Disk: WDC WD1...]
3rd Boot [USB KEY]
4th Boot [USB Floppy:Generic...]
5th Boot [USB Hard Disk]
6th Boot [Network]
7th Boot [UEFI]
8th Boot [CD/DVD]
▶ Hard Disk Drive BBS Priorities
▶ USB Floppy Drive BBS Priorities
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
select the keyboard numlock state
► Bootup Numlock State
This item is used to select the keyboard numlock state. The defaulte setting is [On].
► Quiet Boot
This item is used to enable/disable the quiet boot.
[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.
► Fast Boot
This item is used to enable or disable boot with initialization of a minimal set of devices required
to launch active boot option. This is no effect for BBS boot options.
If you connect external devices, the following item will appear:
► 1st/2nd/3rd/4th/5th/6th/7th/8th Boot Option
These items are used to set the system boot order.
► Hard Disk Drive BBS Priorities/ USB Floppy Drive BBS Priorities
Press <Enter> to go to its submenu.