Foxconn D180S - Manual (Page 15)

HARDWARE INSTALLATION
8
2-1 Install the Memory
If you take a look at front side of memory module, it has asymmetric pin counts on both sides
separated by a notch in the middle, so it can only fit in one direction. Follow the steps below to
correctly install your memory modules into the sockets.
204-Pin
Step 2:
The clips at both ends of the socket will
snap into place when the memory moule
is securely inserted and pressed.
Notch
Step 1:
Plug the pin side of the memory module
into the socket slantwise, then press it
down firmly.
Read the following guidelines before you begin to install the memory :
■ Always turn off the computer and unplug the power cord from the power outlet
before installing the memory to prevent hardware damage.
■ Memory modules have a foolproof design. A memory module can be installed in
only one direction. If you are unable to insert the memory, switch the direction.