Foxconn 975X7AB-8EKRS2H User Manual
Page 48
Chapter 3 BIOS Description
41
v
Case Open Warning
This option is used to enable or disable case open warning function.
v
Wake up by PCI card
This item is used to set the system to wake up by PCI card.
v
Power On by Ring
If this item is enabled, it allows the system to resume from a software
power down or power saving mode whenever there is an incoming call to
an installed fax. This function needs to be supported by the relevant
hardware and software.
v
Wake up On LAN
This item is used to set the system to wake up On LAN.
v
USB KB Wake-Up From S3
This item is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode.
v
Resume by Alarm
This item is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off. The setting values are: Disabled and Enabled.
v
Date (of Month) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the start-up date.
v
Time (hh:mm:ss) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the start-up time.
v
Shutdown by Alarm
This item is used to set the timing of the shutdown function. The setting
values are: Disabled and Enabled.
v
Date (of Month) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the shutdown date.
v
Time (hh:mm:ss) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the shutdown time.
PDF 文件使用 "pdfFactory" 试用版本创建