Foxconn P31A Series User Manual
Page 34
Chapter 2 BIOS Description
28
for systems using an ATX power supply. When select “Instant-off”, once press
power buttton, the power turns off immediately; When select “Delay 4 sec”,
the power will be off after the power button is pressed more than 4 seconds.
5.5 PWRON After PWR-Fail
This item is used to set which state the PC will take with when it resumes
after an AC power loss.
5.6 Wake- up by PCI card
This item is used to wake up the system by PCI card.
5.7 USB KB Wake-Up From S3
It can be active when the ACPI Suspend Type is set to be “S3(STR)”. Use it to
set wake up the system by USB KB when it is in S3(Suspend to RAM) mode.
5.8 Resume by Alarm
This item is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off.
5.9 Date (of Month) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the start-up date.
5.10 Time (hh:mm:ss) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the start-up time.
5.11 HPET Support
This item is used to enable or disable the HPET Support.
5.12 Power On by Mouse
When enabled, it allows you to use the mouse to wake up the system
from soft off and green mode. This feature requires an ATX power supply.
5.13 Power On by Keyboard
This item allows you to use the PS/2 keyboard to wake up the system from soft
off and green mode. This feature requires an ATX power supply. The setting
values: Disabled; Password; Hot KEY; Any KEY; Keyboard 98.
5.14 KB Power ON Password
This item allows you to set the KB power on password.
5.15 Hot Key Power ON
This item allows you to set the power on hot key. The setting values:
Ctrl-F1 ~ Ctrl-F12.
PDF 文件使用 "pdfFactory" 试用版本创建