Foxconn Avenger User Manual
Page 66
59
4
Step 5. If you like the display pattern just created, click [Pro-
gram�� button to make the LEDs start blinking on the mother-
board.
Step 6. If you want the pattern being stored permanently into the
pattern list, you must click �SaveAs�� button to save it, otherwise,
the setting will not be effective next time.
5. QF OC Panel
QF OC Panel module is an optional 5.25 inches display device, it can be purchased separately
and you can install it in your PC’s 5.25 inches drive bay. This panel can display the system real
time clock, allow you to monitor current CPU fan speed, CPU temperature, DRAM voltage and so
on. With several buttons located on its front panel, user can easily set the Front Side Bus speed,
adjust CPU, DRAM and VTT NB voltages and change fan speeds. For detailed descriptions,
please refer to separate QF OC Panel manual.
Click "QF OC Panel" icon to open its panel. This panel will appear on your screen only
when the QF OC Panel module is installed in your system. The display information on the screen
will be synchroni�ed with any actions taken on the QF OC Panel module.