Foxconn P4M800P7MA-ERS2 User Manual
Page 43
Chapter 3 BIOS Description
35
v
AGP 3.0 Calibration cycle
This option allows you to enable or disable the AGP 3.0 calibration cycle. This
cycle ensures that the on-die termination impedance signal swing and slew
rate of the AGP signals are calibrated on a periodic basis to ensure signal
integrity. It is recommended to keep this setting enabled.
v
VGA Share Memory Size
This option is used to set the onboard VGA share memory size. If you are
running under Windows XP or Windows 2000, set this option to 32M or lower.
The setting values are: Disabled, 16M, 32M, 64M.
v
Direct Frame Buffer
This option is used to enable or disable direct frame buffer.
v
Select Display Device
This option is used to select display device.
v
Panel Type
This option is used to select panel type from Min. (0000) to Max. (000F).
v
Output Port
This option is used to select output port.
v
Dithering
This option is used to enable or disable dithering function.
PDF 文件使用 "pdfFactory" 试用版本创建