GAI-Tronics 12584-002 I/O Control Module User Manual
Page 13
Pub. 42004-388B
Model 12584-002 I/O Control Module
Page: 13 of 15
\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-388b.doc
04/07
Table 14. TB8 Terminal Block Assignments
Terminal Labeled Function
Specification
TB8-1
I
N
-25
Input 25
TB8-2
I
N
-26
Input 26
TB8-3
I
N
-27
Input 27
TB8-4
I
N
-28
Input 28
TB8-5
I
N
-29
Input 29
TB8-6
I
N
-30
Input 30
TB8-7
I
N
-31
Input 31
TB8-8
I
N
-32
Input 32
• Short input terminal to GND if using a Normally Open
activation switch.
• Remove input terminal from GND if using a Normally
Closed activation switch.
TB8-9
through
TB8-16
GND
Ground
Ground reference for input 25-32 terminals
TB4- Power Connections
The I/O Control Module requires a dc power supply. The dc power supply voltage must be between 12
and 24 V dc. TB4 is used for power connections. Please refer to the TB4 terminal block assignment
chart and Figure 6 below.
Figure 6. Power connections at TB4
Table 15. TB4 Terminal Block Assignments
Terminal Labeled Function
TB4-1
+
Power (+) 12 to 24 V dc power supply positive terminal
TB4-2
-
Power (-) 12 to 24 V dc power supply negative terminal