Specifications – GAI-Tronics 701-309 Page/Party Handset / Speaker Amplifier with Auxiliary Jack (24 V DC) User Manual

Page 4

Advertising
background image

Pub. 42004-423B

701-309 Handset/Speaker Amplifier (24 V DC) with Auxiliary Jack

Page:

4 of 5

f:\standard ioms - current release\42004 instr. manuals\42004-423b.doc
10/10

Specifications

Amplifier

Power requirements (24 V dc)

Voltage..................................................................................... 21–28.8 V dc range, 25 V dc nominal
Power consumed: zero/max. signal (12 watts) .............................................................. 2.75W/27 W

Construction/Finish................................................................ 16-gauge cold-rolled steel/gray baked enamel

Handset

Microphone............................................................................................................Dynamic, noise-canceling
Receiver ..........................................................................Dynamic, hearing aid compatible per FCC Part 68
Cable ............................................................................................................Retractile, 6-foot extended PVC
Material.......................................................................................................................................... Gray ABS
External controls..................................................... Push-to-page handset pressbar and handset hookswitch

Handset Amplifier

Output level........................................................................................... 1.5 V

RMS

nominal into 33-ohm load

Output limiter..................................................................................................................... 1.5 V

RMS

nominal

Gain....................................................... 55 dB nominal (below limiter level); adjustable from 40 to 63 dB
Frequency response...................................................... 250–4000 Hz, ±3 dB ref. to 1,000 Hz (below AGC)
Distortion ................................................................................................ 1.5% maximum THD @ 1,000 Hz
Controls...............................................................................Microphone gain, receiver volume and sidetone

Speaker Amplifier

Output ................................................................................ 12 watts minimum with nominal supply voltage
Voltage gain...................................................................................................... 26 dB maximum, adjustable
Frequency response........................................................................... 250–4,000 Hz, ±3 dB ref. to 1,000 Hz
Distortion .................................................................................... 1% maximum THD @ 1,000 Hz, 12 watts
Input impedance........................................................................................................... 50,000 ohms nominal
Controls................................................................................... Speaker volume (adjusted through the access

hole behind the nameplate on the front panel)

General

Temperature range ......................................... −22º F to +158º F (−30º C to +70º C), operating and storage
Dimensions ............................................. 8.1 H

× 8.1 W × 3 D inches (20.6 × 20.6 × 7.6 cm) behind panel

8.1

H

× 8.1 W × 3.5 D inches (20.6 × 20.6 × 8.9 cm) front of panel

Shipping weight .....................................................................................................................6.8 lbs. (3.1 kg)

Approvals

NRTL Listed for USA and Canada.......................................................... Class I, Div. 2, Groups A, B, C, D

when used with listed GAI-Tronics 702 or 703 24 V dc series enclosures

Class I, Div. 2, Groups A, B, C, D

Class II, Div. 2, Groups F and G;

Class III, Div. 2, when used with

listed GAI-Tronics 732, 7325, 733, or 7335 24 V dc series enclosures

CE Mark

Advertising