GAI-Tronics 7085-005-UL, 7085-005-EX SmartSeries Multi-Party Hazardous Area Handset/Speaker Amplifier Enclosure w/ RTU Control - Manual

Pub. 42004-697L2B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 7085-005-UL and 7085-005-EX
SmartSeries Multi-Party Hazardous Area
Amplifier Enclosures with RTU Control
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may not
be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 7085-005-UL and 7085-005-EX Multi-Party Remote Terminal Unit (RTU) Amplifier
Enclosures are components of the 700 Series Page/Party
< system. These enclosures are configured for
multi-party system, which can accommodate conversations on up to five party lines simultaneously. They
are constructed of cast aluminum and are extremely weatherproof and corrosion-resistant. These
enclosures are equipped with terminal strips for connecting system cable. The Model 709-901 SmartSeries
Amplifier mates directly with this enclosure.
When connected to a SmartSeries system, the station operates as a standard multi-party Page/Party
®
device. In addition, it supports supervised input circuits and a relay output (supervision optional). The
following configurations are possible:
• 1 supervised input circuit and 1 supervised relay output (factory setting)
• 2 supervised input circuits and no relay output
• 2 supervised input circuits and 1 non-supervised relay output
N OTE : The relay output circuit is intended to be used with GAI-Tronics-approved equipment. The circuit
may not support supervision of equipment that is not approved by GAI-Tronics.
Models 7085-005-UL and 7085-005-EX differ in design by their conduit or cable entries. The Model
7085-005-UL Enclosure contains NPT threads and the Model 7085-005-EX Enclosure contains metric
threads.