GAI-Tronics 12530-002 Transformer/Conn Kit (56116-002) - Manual (Page 2)

Pub. 42003-041A
M ODEL 12530-002 T RANSFORMER /C ONNECTOR S UBASSEMBLY R EPLACEMENT K IT Page: 2 of 2
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-041a.doc
1990
Installation of New Subassembly
1. Plug the new connector onto the PCBA. The connector plugs in only one way – do not force it.
2. Align the holes of the transformer with the holes on the top of the amplifier.
3. Insert and tighten the two self-tapping screws.
4. Tighten the four screws to secure the chassis to the front panel of the amplifier.
5. Place the amplifier in the enclosure.
6. Tighten the four front panel screws to secure the amplifier.