GAI-Tronics 12533-001 Speaker Replacement Kit for 13350, 13351 - Manual (Page 2)

Pub. 42003-089A
M ODEL 12533-001 S PEAKER R EPLACEMENT K IT Page: 2 of 2
f:\standard ioms - current release\42003 kit manuals\42003-089a.doc
04/11
7. Use the four new screws to secure the speaker. Tighten the screws to 16–20 in-lbs. torque.
8. Reconnect the two quick-connect receptacles to the speaker:
Model 13350: Connect the black wire receptacle to the speaker terminal with the red mark. Connect
the white wire receptacle to the other speaker terminal.
Model 13351: Connect the purple wire receptacle to the speaker terminal with the red mark.
Connect the blue wire receptacle to the other speaker terminal.
Model 13354-001: Connect the orange wire receptacle to the speaker terminal with the red mark.
Connect the white and black wire receptacle to the other speaker terminal.
9. Model 13350: Reconnect the black and white quick-connect receptacles to the terminal block
terminals in the rear enclosure per the terminal block label.
Model 13351: Plug the wire harness into the connector below the speaker.
Model 13354-001: Reconnect the white quick-connect receptacle to the terminal block terminals in
the rear enclosure per the terminal block label (com – white).
Reconnect the yellow quick-connect receptacle to the 8-ohm on the terminal block terminals in the
rear enclosure.
10. Align the front panel with the rear panel of the speaker. Tighten the front panel screws to 16–20
in-lbs. torque.