GAI-Tronics 12504-007, 12504-008 RigCom Harness Assembly User Manual
Page 3
Advertising
Pub. 42003-146
M
ODELS
12504-007
AND
12504-008
R
IGCOM
H
ARNESS
R
EPLACEMENT
K
IT
Page:
3 of 3
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-146.doc
12/94
5. Plug the connector into the printed circuit board, and attach the front cover to the unit with the new
bolts. Make sure that the ribbon cable is not pinched. Tighten the bolts to 30 foot-pounds.
Figure 2. Bottom Edge View
Advertising