GAI-Tronics 12802-001 Switch Replacement Kit - RigCom Only User Manual
Page 2
Advertising
Pub. 42003-213A
M
ODEL
12802-001
S
WITCH
R
EPLACEMENT
K
IT
Page:
2 of 2
\\s_eng\gtcproddocs\standard ioms - current release\42003 kit manuals\42003-213a.doc
09/06
8. Screw one spacer onto each of the switches on the front cover.
9. Fasten the rotary knob onto the rotary switch and screw the cover onto the push-button
switch.
10. Fasten the potentiometer switch and harness onto the rear of the rotary switch.
11. Screw blue and violet wires into the push-button switch per
Figure 1
.
12. Plug in the connector on the cable assembly into the PCBA. See
Figure 1
.
13. Close the front cover and screw the 12 bolts back into the enclosure. The recommended
torque setting for the cover bolts is 17 ft-lbs (23 N-m).
Figure 1. Switch Replacement Diagram
Advertising