GAI-Tronics 12821-001 ICS RTU Upgrade Kit - Manual

Pub. 42003-235C
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
ICS RTU Upgrade Kit
Model 12821-001
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12821-001 ICS RTU Upgrade Kit provides the following components:
Qty Description
1 ICS RTU Module PCBA
1 Cable Assembly
4 Standoffs, 7/16-inch long
4 Screw, 4-40
1/4-inch PHMS
1 Resistor, 20 k-ohm, 10 W
1 Label, RTU Identification
Installation
Place the RTU upgrade identification label on the power supply housing.
Refer to Pub. 42004-724L2 (indoor station), Pub. 42004-725L2 (outdoor station), or 42004-726L2
(remote amplifier station) for general information and installation procedures.