GAI-Tronics XAC0140A Navigator Instant Recall Recorder (IRR) Kit - Manual (Page 2)

Pub. 43003-033A
Model XAC0140A Navigator Instant Recall Recorder (IRR) Kit Page: 2 of 5
\\s_eng\gtcproddocs\radio products-current release\43003\43003-033a\43003-033a.doc
10/04
2. If Acrobat Reader is not installed on the PC, install the reader by pressing the A CROBAT R EADER
button from the menu.
3. Press the I NSTALL button to begin the installation. The Setup Wizard screen should appear in a few
seconds. Click the N EXT button to continue.
4. The Installation Folder screen will appear and ask where you would like the ICP9000 Series
Navigator installed. Ensure that the “Folder” line for the installation program indicates the desired
location. The default is set as C:\Program Files\ICP9000Navigator. Click the N
EXT button to
continue.
5. The Confirm Installation screen will appear and confirm you are ready to install the program. Click
the N EXT button to continue.
6. Installation may take a few minutes, and will be confirmed by the next screen, indicating that the
installation is complete. At this time, all ICP9000 Navigator components will be installed in the
system. Click the C
LOSE button to continue.
7. Insert the purple security key into any enabled USB port on the PC and double click the Navigator
icon that now appears on the PC’s desktop.
8. Click on the ICP9000 Operator’s Manual desktop icon to view the manual.