GamuT CD3 - Manual (Page 6)

6
CD 3
Placement
The CD 3 will get hot during use. It is important that it has free space all around the player, especial-
ly sides and the top.
Please make sure that there is at least 10 cm (4 inches) of free space all around the CD player.
Connecting to the mains
Your CD 3 has been especially made for the country to which it has been shipped. Any attempt to
change the voltage or other types of modifi cations should be considered unsafe and may cause dam-
age to both the CD player and any connected equipment. Warranty is annulled by any form of modifi -
cation performed by any person not authorised by GamuT.
Connect the CD 3 to the mains supply with the supplied IEC mains cable.
For further improvements to the level of sound quality, various types of mains cable type may be
tested. Like the importance of any other cable in the system, the quality and refi nement of the
mains cable has an infl uence on the total balance of the sound. Please feel free to experiment with
the various brands available in your country. Please note that GamuT cannot accept responsibility
for damage incurred due to improper usage, connection, or manufacture of other cables than the
enclosed.
The mains switch is located underneath the amplifi er’s front right corner. When the CD player is
switched on, the display will illuminate and you will hear two small clicks from inside the CD player.