Gladiator GAGB262DBG Starter Series 2-Door Modular GearBox - Manual (Page 3)

3
6. Insert 2 carriage-head bolts into the bottom panel/cabinet back
and secure with the serrated washers and hex nuts.
7. Insert the caster into the mounting bracket.
Remove and Replace the Drawers
Remove the Drawer
1. Unload the contents from the drawer.
2. Slide out the drawer as far as it will go.
3. Press the lever down on the right-hand track and lift the lever up
on the left track to release the drawer.
4. Pull the drawer straight out evenly on both sides to remove it
from the glide track.
Replace the Drawer
1. Align the drawer guides with the receiving glides.
2. Hold the receiving glides firmly and insert the drawer guide.
NOTE: It is normal for the drawer to close tightly the first time
after it has been removed.
3. Push the drawer in completely.
A. Carriage-head bolt with serrated
washer and nut
B. Carriage-head bolt
C. Serrated washer
D. Caster mounting bracket
E. Hex nut
B
C
D
E
A
A. Lever
A