Gladiator GABK301PRS Wall Bracket Kit for Tall GearBox and GearLocker - Manual (Page 2)

2
MOUNTING BRACKET SAFETY
INSTALLATION INSTRUCTIONS
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
Parts Supplied:
Bracket Use Requirements
■ Intended for use with Gladiator ® Welded-Steel Tall GearBox &
GearLocker cabinets only.
NOTE: These brackets are not designed to be installed on
cabinet models: GATGB000LG0 and GATGBL00LG0.
■ Intended to be used for mounting on Gladiator GearWall ® panels
or GearTrack ® channels.
■ Brackets will support a cabinet with a maximum weight limit of
300 lbs (136 kg).
Unpack Brackets
1. Verify contents. See “Parts Supplied.”
2. Dispose of/recycle all packaging materials.
Attach Mounting Brackets
IMPORTANT: There are three groups of four slots in the back panel
of the tall cabinet. The mounting brackets must be attached to the
top pair of slots in each group.
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
■ ¹⁄₂" Wrench
■ Mounting brackets (3)
■ Hex nuts (6)
■ ¹⁄₄" x ¹⁄₂" Carriage bolts (6)
■ Washers (6)