Gladiator GAGB272DRG Premier Series Modular GearBox - Manual (Page 2)

2
CABINET/LOCKER SAFETY
ASSEMBLY INSTRUCTIONS
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
Parts Supplied:
Cabinet Use Requirements
■ Intended for use in a garage.
■ Maximum weight limit is 65 lbs (29 kg) for the tray/shelf.
■ Maximum weight limit is 1,400 lbs (635 kg) for the cabinet.
Unpack the Cabinet
NOTE: Keep the packing materials to cushion the cabinet during
assembly and then dispose of/recycle all packaging materials.
1.
Remove the key, located in the handle, and unlock the doors or
drawers.
2. Verify contents. See “Parts Supplied.”
Install the Bumpers
1. Close and lock the doors or drawers. Remove the key.
NOTE: The drawers must be pushed in completely to lock.
2. Remove the top mat from the cabinet.
3. Using two or more people, turn the cabinet upside down.
4. Attach the bumpers to the front corners using four washers and
four Phillips-head screws for each bumper.
NOTE: To keep from stripping the screws, do not overtighten.
5. Using a Phillips screwdriver, tighten all the screws.
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
■
⁷⁄₁₆" Wrench
■ Flat-blade screwdriver
■ Phillips screwdriver
■ Key (1)
■ Top mat (1)
■ Drawer model: Drawer liners (5)
Cabinet model: Tray liner (1)
■ “L”-shaped bumpers (2)
■ Phillips-head screws (8)
■ Washers (8)
■ Rigid casters (2)
■ Swivel casters (2)
■ ¹⁄₄" - 20 Self-locking
nuts (16)
■
¹⁄₄" - 20 x ¹⁄₂" Carriage-
head bolts (16)
A. Bumper
B. Washer C. Phillips-head
screw
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install
cabinet.
Failure to do so can result in back or other injury.
B
C
A