Caster safety installation instructions, Danger warning, Warning – Gladiator GARF19XXYK Gladiator Chillerator Garage Refrigerator Installation Instruction User Manual

Page 2: Tools and parts, Unpack casters, Install casters

Advertising
background image

2

CASTER SAFETY

INSTALLATION INSTRUCTIONS

Tools and Parts

Gather the required tools and parts before starting installation.
TOOLS NEEDED:

PARTS SUPPLIED:

Unpack Casters

Depending on your model, the casters may be packed in either the
upper or lower compartment. Remove the box containing the
casters.

Install Casters

NOTE: Install the casters before you install any of the FeaturePak
items.
1.

Open the lower compartment door and remove the base grille.
Remove the grille by grasping the grille with both hands, lifting up
and pulling bottom of the grille toward you.

2.

Place the plastic skids (shipped with the refrigerator/freezer) on
the floor at least 3 ft (91.44 cm) apart. Lay a piece of cardboard
or other protective material over the skids. This will elevate the
refrigerator/freezer to allow for easier caster installation and also
protect it from scratches.
NOTE: If the skids have been discarded or are not available,
2" x 4" boards may be used.

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

¹⁄₂" Socket wrench or nut

driver

¹⁄₂" Wrench

³⁄₈" Socket wrench or nut

driver

Rigid casters (2)

Swivel casters (2)

⁵⁄₁₆–18 Self-locking

hex-nuts (16)

⁵⁄₁₆–18 x ⁷⁄₈"

Hex-head bolts (16)

¹⁄₄–20 x 1¹⁄₄" Self-tapping

hex-head bolts (4)

¹⁄₄–20 x 1¹⁄₄" Lock washers (4)

Caster brackets (located in
FeaturePak) (2)

Plastic skids (shipped with
the refrigerator/freezer)

WARNING

Excessive Weight Hazard

Use two or more people to move and install
refrigerator/freezer.

Failure to do so can result in back or other injury.

Advertising