Greenheck On-site testing and Adjusting Pressure Relief Doors (469133) User Manual

Our commitment

Advertising
background image

The design elements of your particular HVAC installation may create velocity pressures that will affect the
operation of this Pressure Relief Door. These elements include:
• size, speed, and design of the fan
• proximity of the pressure relief door to the fan or damper
• configuration of the ductwork
• airflow dynamics at the location of the pressure relief door
Because of these variables, it is imperative that this door be tested in place, and the latch adjusted as
needed.
To adjust the pressure setting of the magnetic latch to a higher pressure, loosen the set screw and move the
latch away from the hinges. Conversely, to adjust the pressure setting of the latch to a lower pressure, move it
closer to the hinges.
In some cases, it may be necessary to remove the slotted latch-mounting bracket, reverse it end-for-end, and
re-mount it onto the door frame in order to extend the range of the adjustable magnet.
Although the magnet is sized for a predetermined pressure range, the door is usable outside of this range
by replacing the magnet with one having more or fewer magnetic bars. If such a magnet is needed for your
application, contact A.J. Manufacturing.
The box below shows the approximate relationship between latch distance and air pressure for different door
sizes:

Document Number 469133

Installation Instructions for On-Site Testing

and Adjustment of Pressure Relief Door

Door Size (in inches) Magnet size

Distance to equal

approximately 1 inch wg

10 x 10

1-bar

1/2 inch

10 x 10

2-bar

3/8 inch

12 x 12

1-bar

1/2 inch

12 x 12

3-bar

1/4 inch

18 x 18

5-bar

3/8 inch

18 x 18

10-bar

3/16 inch

24 x 24

5-bar

1/2 inch

24 x 24

10-bar

1/4 inch

®

469133• PRAD VRAD Adj. Rev. 2, October 2012

Copyright 2012 © Greenheck Fan Corporation

As a result of our commitment to continuous improvement, Greenheck reserves the right to change

specifications without notice.

Specific Greenheck product warranties are located on greenheck.com within the product area tabs and in

the Library under Warranties.

®

Phone: (715) 359-6171 • Fax: (715) 355-2399 • E-mail: [email protected] • Website: www.greenheck.com

Our Commitment

Advertising