Guntermann & Drunck USB 2.0 Ranger 2101 - Manual (Page 4)

Introduction
The instructions in this guide assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding of USB devices.
NOTE: Notes provide additional information that could be useful.
CAUTION: Cautions provide important information about an operational requirement.
Ranger 2101 product contents
Your Ranger 2101 is packaged with:
• Ranger 2101 Quickstart Guide - Located on the outer box sleeve
• LEX unit (Local Extender)
• REX unit (Remote Extender)
• REX AC power adapter
• Warranty card
Requirements
To complete the installation, you will also require the following items that are not included with the product:
• USB 2.0 or 1.1 compatible computer (Host computer) with a USB compliant operating system
• USB 2.0 or 1.1 compatible device
• Cat 5e Unshielded Twisted Pair (UTP) cable with two RJ45 connectors (if using surface cabling),
OR, Cat 5e cabling with two information outlets and two Cat 5e patch cords with RJ45 connectors (if
using premise cabling)
This product supports solid core Cat 5e or better cabling (i.e.: Cat 6, Cat 7, etc). All references to “Cat 5e”
should be read as “Cat 5e or better”.
About the Ranger 2101
The Ranger 2101 incorporates Icron’s patented ExtremeUSB® technology, enabling users to extend beyond
the standard 5m cable limit for USB peripheral devices. With the Ranger 2101, USB devices can be located up
to 100 meters from the computer.
The Ranger is composed of two individual units; the LEX unit and the REX unit.
note
note
3