Harken 2148 T2 Loop Block - Manual

I N S T R U C T I O N S
Strictly follow all instructions to avoid an accident, damage to your vessel, personal injury or
death. See www.harken.com for additional safety information.
Part
No. Description
Sheave
Ø
Max line
Ø
Maximum
working load
Breaking
load
in mm lb kg lb kg
2148 40 mm 40 mm 3 /
8
10 485 220 1200 544
2151 57 mm 57 mm 7 /
16
10 792 359 2380 1080
Replacement Loops
Part
No. Description
Sheave
Ø
Replacement
Loops /Lines
Replacement line
Ø
Loop
length Line
Type in mm in mm
2148 40 mm 40 mm 2154 1 /
8
3 5 1 /
2
140 Spectra
2151 57 mm 57 mm 2155 1 /
8
3 6 1 /
2
165 Spectra
Specifications
Planning Installation
Loop Only to Objects with Rounded Edges. Avoid sharp corners.
WARNING! Loop can cut easily on sharp corners causing loop to break suddenly under load,
possibly causing an accident, damage to your vessel, personal injury or death. See www.
harken.com for additional safety information.
T2 Loop Blocks 2148, 2151
INCORRECT CORRECT
Rounded Sharp
Anchor Post
Head
Mouth
Sheave
Bail
Loop
USA – Tel: (+01) 262-691-3320 • Web: www.harken.com • Email: [email protected]
Italy – Tel: (+39) 031.3523511 • Web: www.harken.it • Email: [email protected]
Sheave spins on ball bearings: low friction
No metal: inside or out.
Quick attachment: using loop.
Features Terms
Important information on choosing line, knots and splices. Go to US Sailing article:
http://offshore.ussailing.org/Assets/Offshore/SAS/PDF/Dyneema+Article.pdf