Harken 351 29, 40, 57 mm Ti-Lite Block User Manual

Ti-lite carbo airblock

Advertising
background image

I N S T R U C T I O N S

Ti-Lite Carbo AirBlock

®

351 (29mm), 2651 (40mm), 2607 (57mm)

1251 E. Wisconsin Avenue • Pewaukee, WI 53072 USA

Tel: 262-691-3320, Fax: 262-691-3008

Web: www.harken.com, Email: [email protected]

A2 Repeat A1 two times.

See: E Finish—
Dead-End Line.

A1

A2

A1 Pass line through
mouth, through head,
around bail, through
head and through
mouth in opposite
direction.

B1 Pass line through
mouth, through head,
around bail so line
crosses
. Go through
head and through
mouth in opposite
direction.

B1

B2

B Tie to Bail/Eyestrap—Perpendicular

B2 Repeat B1 two
times, crossing line
each time.

See: C Tie to Boom.
for complete
instructions.

See: E Finish—
Dead-End Line.

A Tie to Bail/Eyestrap—Parallel

WARNING!: Use three loops of the line supplied.

Using fewer loops will weaken the block causing

it to break suddenly causing an accident, damage

to your vessel, personal injury or death. See

www.harken.com for additional safety information.

Inspect Line Every Time You Sail

Inspect line for chafe or UV-damage every time you sail. Replace
damaged line immediately. Replace line with no visible damage after
no more than two-years use. Consult Chart B (left) for replacement
line or use block breaking strength, Chart A (left) to select the
correct line.

Tie to Mouth of Block

Use Three (3) Loops of Supplied Line

Tie Only to Objects with Rounded Edges

Part

No.

Reorder

Part No.

Line Ø

Line Type

in

mm

351

HCP1438

1/16

2

Maxibraid

2651

HCP1419

3/32

2.5

Maxibraid

2607

HCP392

1/8

3

Maxibraid

Chart B—Line Replacement

*Includes 4' (1.2m) line

Part

No.

Size

(mm)

Maximum Working Load (MWL) Breaking Load (BL)

lb

kg

lb

kg

351*

29

330

150

1000

454

2651*

40

485

220

1200

544

2607*

57

792

360

2380

1080

Chart A—Block Specifications

3 LOOPS

hEAD

MOUTh

Strictly follow all instructions to avoid an accident,

damage to your vessel, personal injury or death. See

www.harken.com for additional safety information.

WARNING!: Attach only to objects with rounded edges.

Do not tie block to stamped eyestrap. This will cause

line to chafe and break suddenly causing an accident,

damage to your vessel, personal injury or death. See

www.harken.com for additional safety information.

WARNING!: Tie only to the mouth of the block as

shown. Do not tie to head of block. This will cause

the block to break suddenly causing an accident,

damage to your vessel, personal injury or death. See

www.harken.com for additional safety information.

WARNING!: Failure to inspect and replace UV-

damaged, worn or frayed line can cause the line

to break suddenly causing an accident, damage

to your vessel, personal injury or death. See

www.harken.com for additional safety information.

CORRECT

Rounded

Sharp

INCORRECT

CORRECT

INCORRECT

Advertising
This manual is related to the following products: