Harken 62 Handhold User Manual
Harken Hardware
I N S T A L L A T I O N S H E E T
062 Handhold
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 691-3008 • Web: http://www.harken.com • Email: [email protected]
TIP: To prevent leakage
at screws, use a pocket
knife to slightly bevel/
countersink the top of
deck screw hole to allow
sealant to mass around
screw top.
You Must Purchase: Five (5) #10 or 5 mm stainless steel sheet metal, machine, or wood flathead
screws.
3
/
16
" (4mm) plastic tubing to drain to bilge (optional).
You Must Purchase
Using Drain Spigots
Only drill spigots you wish to drain. Use
1
/
8
" or 3 mm drill to ream out drain spigots. Attach
purchased plastic tubing so handhold drains to bilge. If you use multiple handholds, connect
spigots in a series so that only one long tube is needed to drain to bilge.
Slightly
Bevel
I N S T A L L A T I O N S H E E T
062 Handhold
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 691-3008 • Web: http://www.harken.com • Email: [email protected]
TIP: To prevent leakage
at screws, use a pocket
knife to slightly bevel/
countersink the top of
deck screw hole to allow
sealant to mass around
screw top.
You Must Purchase: Five (5) #10 or 5 mm stainless steel sheet metal, machine, or wood flathead
screws.
3
/
16
" (4mm) plastic tubing to drain to bilge (optional).
You Must Purchase
Using Drain Spigots
Only drill spigots you wish to drain. Use
1
/
8
" or 3 mm drill to ream out drain spigots. Attach
purchased plastic tubing so handhold drains to bilge. If you use multiple handholds, connect
spigots in a series so that only one long tube is needed to drain to bilge.
Slightly
Bevel
I N S T A L L A T I O N S H E E T
062 Handhold
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 691-3008 • Web: http://www.harken.com • Email: [email protected]
TIP: To prevent leakage
at screws, use a pocket
knife to slightly bevel/
countersink the top of
deck screw hole to allow
sealant to mass around
screw top.
You Must Purchase: Five (5) #10 or 5 mm stainless steel sheet metal, machine, or wood flathead
screws.
3
/
16
" (4mm) plastic tubing to drain to bilge (optional).
You Must Purchase
Using Drain Spigots
Only drill spigots you wish to drain. Use
1
/
8
" or 3 mm drill to ream out drain spigots. Attach
purchased plastic tubing so handhold drains to bilge. If you use multiple handholds, connect
spigots in a series so that only one long tube is needed to drain to bilge.
Slightly
Bevel
I N S T A L L A T I O N S H E E T
062 Handhold
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Telephone: (262) 691-3320 • Fax: (262) 691-3008 • Web: http://www.harken.com • Email: [email protected]
TIP: To prevent leakage
at screws, use a pocket
knife to slightly bevel/
countersink the top of
deck screw hole to allow
sealant to mass around
screw top.
You Must Purchase: Five (5) #10 or 5 mm stainless steel sheet metal, machine, or wood flathead
screws.
3
/
16
" (4mm) plastic tubing to drain to bilge (optional).
You Must Purchase
Using Drain Spigots
Only drill spigots you wish to drain. Use
1
/
8
" or 3 mm drill to ream out drain spigots. Attach
purchased plastic tubing so handhold drains to bilge. If you use multiple handholds, connect
spigots in a series so that only one long tube is needed to drain to bilge.
Slightly
Bevel