Harken 7413.10 MKIV Jib Reefing & Furling built after Feb. 2009 - Manual

Please read these instructions carefully before installing, servicing, or operating the equipment.
This manual may be modified without notice. See: www.harken.com/manuals for updated versions.
PLEASE SAVE THESE INSTRUCTIONS
MKIV JIB REEFING & FURLING
Unit 3, 4
Installation Manual – Intended for specialized personnel or expert users
4673 11/14
Preassembly
Safety precautions/parts descriptions 2
Sizing check 3
Parts 4 - 5
Line/rigging parts check/tools 6
Dimensions/sailmaker's instructions 7
Toggle deductions/stay into foil options 8
Top foil length Unit 3/Unit 4 9 -10
Short top foil Unit 3/Unit 4 11 - 12
Confirm foil length 13
Assembly
Foils/connectors 14 - 20
Halyard swivel 20
Drum assembly 21
Rod rigging 22
Attach turnbuckle/toggle 23
Attach toggle/short length plate 24
Attach toggle/long length plate 25
Feeder/final 26
Commissioning–Unit 3/4
Turnbuckle on boat 27
Lead line to cockpit 28
Halyard wrap/prevent halyard wrap 29
Pendant/halyard: restrainer/ halyard tension 30
Commissioning—Unit 4
Tying soft attachment tack/head/halyard 31
Operation
Halyards/headstay tension 32
Raise sails/storm sails/reefing 33
Reef/secure sail 34
Race conversion 35
Maintenance
Clean/inspect 36
Replace line
36
Storage/remove furler 36
Troubleshoot 37
Warranty 37
Appendix 38 - 41