Harken C8436 MKIV Jib Reefing & Furling - Manual (Page 10)

Start plunger into injector and immediately
hold upright so plunger is down and tip
applicator is up.
As sealant runs down towards the plunger
an air pocket will form near the tip. Push
plunger to evacuate the air. You are now
ready to begin injecting adhesive.
Hold plastic wedge in place with thumb
as you insert into foil. Line foil holes
with connector screw holes.
Put a drop of adhesive into screw holes.
Assembly Foils/Connectors
10 Nautor MKIV Furling 4/18/07