Harken 7412.13 12V MKIV Electric Jib Reefing & Furling - Manual

Please read these instructions carefully before installing, servicing, or operating the equipment.
This manual may be modified without notice. See: www.harken.com/manuals for updated versions.
PLEASE SAVE THESE INSTRUCTIONS
MKIV JIB REEFING & FURLING
Unit 2E, Unit 3E
Installation Manual – Intended for specialized personnel or expert users
4676 04/14
Preassembly
Safety Precautions 2
Parts Descriptions 2 - 3
Size Check 3
Parts 4 - 5
Rigging Parts Check/Tools 6
Dimensions/Sailmaker's Instructions 7
Toggle Deductions/Stay Into Foil Options 8
Top Foil Length/Short Top Foil – 2E 9 - 10
Top Foil Length/Short Top Foil – 3E 11 - 12
Confirm Foil Length 13
Assembly
Foils/Connectors 14 - 19
Bottom Foil/Connectors/Halyard Swivel 20
Lower Unit to Foil 21
Rod Rigging 22
Attach Toggle/Short Link Plate 23 - 25
Feeder/Final 26
Commissioning
Turnbuckle on Boat 27
Electrical System 28 - 29
Halyard Wrap/Prevent Halyard Wrap 30
Pendant/Halyard Restrainer/Halyard Tension 31
Operation
Spinnaker
Halyards/Headstay Tension 32
Raise Sails/Storm Sails/ Furling and Reefing 33
Reefing/Secure Sail 33
Race Conversion 34
Manual Operation 35
Maintenance
Clean/Inspect/Storage/Remove Furler 36
Troubleshooting/Warranty 37
Appendix
Component Part Number List 38 - 42
Toggle Dimensions 43
Performance Charts 44
Power Cable Through-Deck Template 45