2 pt – Harken 50.2PT Winche User Manual
Page 9
9
Radial Winch
50.2 PT
Installation and Maintenance Manual
WARNING!
Periodic maintenance must be carried out regularly. Lack of adequate maintenance
shortens the life of the winch, can cause serious injury and also invalidate the winch
warranty. Installation and maintenance of winches must be carried out exclusively by
specialized personnel.
In the case of doubt contact Harken
®
Tech Service at [email protected]
Disassembly procedure
Tools needed
One medium flat-bladed screwdriver
A number six hex key
Rags
To identify the various parts refer to the exploded view at the end of this Manual.
Torque to be applied in assembly phase
Carry out
Procedure 1 as shown in the paragraph on winch installation and then do the following:
4. Completely unscrew the three screws n° 29
and remove the socket support n°23
6. Unscrew the 6 hex screws n°18
5. Slide out the central shaft n°21
7. Remove the assy housing n°17
Important: washer n°14 may remain
inside the drum support!