Highgear Axis XT User Manual

Axis-xt quick start manual english, Primary modes of operation, Warnings & cautions

Advertising
background image

AXIS-XT

QUICK START MANUAL

ENGLISH

For full specifications, technical support, FAQs, manuals in additional languages or

warranty information, please visit www.highgear.com or call 1.800.446.7587.

Primary Modes of Operation

- To enter the primary modes, PRESS MODE to enter TIME mode, then

PRESS the corresponding button.

ALTIMETER > BAROMETER > COMPASS

ALTIMETER

COMPASS

T1

BAROMETER

TIME

T1

In any mode,

PRESS the

LIGHT button

to illuminate

the display for

5 seconds.

In TIME mode,

PRESS & HOLD

the LIGHT button

to activate /

deactivate the

BUTTON LOCK

feature.

T1

PRESS THE

MODE BUTTON

TO ENTER TIME

MODE, THEN:

PRESS THE

ALTI BUTTON

TO ENTER

ALTIMETER MODE

PRESS THE

BARO BUTTON

TO ENTER

BAROMETER MODE

PRESS THE

COMP BUTTON

TO ENTER

COMPASS MODE

Warnings & Cautions

PLEASE READ all information in this instruction manual before using this unit.
Please keep in mind, your watch is a sensitive technical instrument. With proper care and maintenance, it will last for many

years. However, improper care and handling can cause the various sensors to be damaged and will harm the functioning

capabilities.
WARNING: This product is NOT designed to be used as a PRIMARY altitude instrument for flying, skydiving, hang gliding or

other sports where sudden significant changes in altitude may occur or when there is a need for industrial precision.
WARNING: This product is an advanced training and fitness tool. Before starting any exercise program,

we strongly suggest you visit your doctor for a complete physical and to discuss your exercise plans.
NEVER push the buttons underwater, when the watch is wet or when you are cleaning or rinsing the unit.

You are actually pushing water inside the watch.
DO NOT use the watch in a hot tub or extremely hot shower/bath. High temperatures and steam can damage the rubber seals.
DO NOT expose the watch to sudden changes of temperature by going from a hot tub to cold water.

This can make the rubber seals contract and allow water to penetrate.
DO NOT wear the watch in soapy dish water or bubble baths.The alkali contained in soaps can damage the rubber seals.
DO NOT use cleaning solvents to clean your watch. Solvents WILL damage the integrity of the plastic.

The watch can be wiped clean with a lightly moistened cloth.
ALWAYS rinse the watch with clear tap water after exposure to salt water.

Salt is highly corrosive and can damage both the rubber seals and the watch case.
PROTECT the watch from extreme heat, shocks and excessive exposure to direct sunlight.
NEVER expose the watch to strong chemicals such as gasoline, cleaning solvents, acetone, alcohol, insect

repellent, sunscreen and other toiletries, as they may damage the unit.
KEEP the unit out of the reach of children and pets. The unit contains small parts that might be swallowed.

Battery Information:

Signs of a failing / dying battery are a fading or blank display (especially when the backlight is active) and/or inaccurate readings.

-

Using a coin, remove the battery coin hatch. Remove the old CR2032 battery & replace it with a new CR2032 battery. Be

sure the battery is in the correct polarity position – positive (+) side of the battery is visible. Replace the battery coin hatch

carefully; ensure the coin hatch is properly replaced or the water resistance will be affected and could VOID THE

WARRANTY.

NOTE: Keep watch batteries away from children and pets.
NOTE: This product contains a button-cell battery. If swallowed, contact a physician immediately; severe damage or death may occur.
NOTE: Watch batteries contain chemical substances. Dispose of the watch, battery and all components according to local regulations.

Unlawful disposal can contribute to environmental pollution.
NOTE: Do not place battery in fire; the battery may explode.
NOTE: Special handling may apply. See www:dtsc.ca.gov/hazardouswaste/perchlorate.
BE AWARE: Lithium batteries of the type used in this unit are very susceptible to improper storage. Many times, batteries purchased as

new are dead or weak before they are purchased. If you try a new battery and problems persist, please try a second battery from

another source, just to be certain.

Highgear, a Division of Implus Footcare, LLC.

2001 T.W. Alexander Drive / Box 13925
Durham, NC 27709-3925
Printed and Produced in PRC.
©2013 Implus Footcare, LLC. All rights reserved.

PRESS & HOLD ALL BUTTONS

TO ACTIVATE THE WATCH DISPLAY

MODE

BAROMETER

COMPASS

ALTIMETER

Advertising
This manual is related to the following products: