Highgear VIA FM - Manual (Page 18)

english
16
BASIC & PULSE:
1.Remove screw that holds battery door
closed.
2.Remove old batteries.
3.Install new batteries, making sure the
polarity of each is correct.
4. Replace and tighten the battery door.
5.Replace the battery compartment and fasten
the screw.
NOTE: The units are powered by CR2032
3v Lithium batteries. These batteries are
very common and can be found at most
drug stores and camera shops.
CHANGING THE BATTERIES
BasicNB.indb Sec1:16 asicNB.indb Sec1:16 12/20/06 11:00:14 AM 12/20/06 11:00:14 AM