HiTi P510L - Manual (Page 7)

user manual L
Making Printer Ready to Print
b. Putting the paper roll into paper box
c. Powering up the printer
7
Load the paper box into the printer
and then close the front door to
finalize the installation. After the printer is turned on, your
printer is ready for use.
1 2
Flip the paper box as shown, and
then press the box button to open
the box. Place the paper roll into the box as
shown, make sure the color of paper
roll flange is in consistency with
same color of flange holder inside
the box.
Remove the seal from the paper
after setting the paper roll, and
then pull out the paper so that it
comes out across the box edge. Close the box
Rotate the knob counterclockwise to
draw back protruding paper until it’s
straight and aligns with paper box
bottom edge as shown.
(Open the box)
English