Dukane Camera Visual Presenter 335B - Manual (Page 31)

English - 30
Chapter 10 Troubleshooting
This chapter outlines possible solutions to common problems. For other issues,
contact your dealer or service center.
No. Problems Solutions
1 No power signal Check that the power cord is securely connected to
the wall socket and the unit.
2 No image output
from the Camera
335B 1. Check the power outlet.
2. Check the connection. Refer to
4.2.2 Connecting
to external devices in Chapter 4 Installation
and Connections
in this manual.
3. Check the signal sources [SOURCE]. Refer to 7.1
Switching image sources in Chapter 7
Descriptions of major functions
in this manual.
4. Check the settings for the projector source. Refer
to the projector’s user manual.
5. Check if DIP Switch is properly set. Refer to
Chapter 5 DIP Switch for related settings.
3 Unable to focus Probably the document is too close to the lens. Press
[ZOOM -] on the remote control or control panel.
Or increase the distance between the lens and the
document, and then press the [FOCUS] button on
the right side of the lens.
4 Cannot see the
entire image Check Auto Image of the projector. Refer to the
projector’s user manual.
5 Visual Presenter
V2, B-WORKS and
other applications
cannot be used
simultaneously
Visual Presenter V2, B-WORKS and other
applications cannot be used simultaneously. Please
close the currently running applications and then
execute the desired application.