Hoist Fitness V-SELECT - Manual (Page 20)

FRAME ASSEMBLY
- WRENCH TIGHTEN HARDWARE.
PREVIOUS STEPS.
- WRENCH TIGHTEN ALL HARDWARE FROM
NOTE:
OWNER'S MANUAL
PAGE 19 V-SELECT ASSEMBLY
*IMPORTANT*
NOW THAT THE V-SELECT FRAME IS ASSEMBLED TAKE TIME TO ASSURE
THAT YOUR UNIT IS ASSEMBLED SQUARE AND PERPENDICULAR. USE A LEVEL TO
CHECK THAT THE GUIDE RODS ARE PERPENDICULAR IN BOTH DIRECTIONS. IF NOT,
IT WILL BE NECESSARY TO LOOSEN SOME FRAME HARDWARE TO RE-ALIGN THE
FRAME AND RETIGHTEN BOLTS.
54
8
59
51
19